Info: 'Memory Error detected by SmartHeap Library.'
DITL_29877.txt
Items: (4 entries)
0:
Bounds: x1=47, y1=52, x2=359, y2=78
Type: 8
Info: 'Error Code ^0.'
1:
Bounds: x1=202, y1=91, x2=273, y2=112
Type: 4
Info: 'Quit'
2:
Bounds: x1=288, y1=91, x2=359, y2=112
Type: 4
Info: 'Ignore'
3:
Bounds: x1=47, y1=17, x2=359, y2=51
Type: -120
Info: 'Memory Error detected by SmartHeap Library.'
DITL_3602_Update Success Alert.txt
Items: (2 entries)
0:
Bounds: x1=270, y1=100, x2=330, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=82, y1=3, x2=330, y2=83
Type: -120
Info: '^1 devices updated.'
DITL_3601_Update Ext Alert.txt
Items: (3 entries)
0:
Bounds: x1=270, y1=100, x2=330, y2=120
Type: 4
Info: 'Proceed'
1:
Bounds: x1=190, y1=100, x2=250, y2=120
Type: 4
Info: 'Cancel'
2:
Bounds: x1=82, y1=3, x2=330, y2=83
Type: -120
Info: 'Warning: Some of the devices to be updated are in circuits that are not open for editing. If you proceed, some pin connections in these circuits may be changed or broken and should be reviewed manually.'
DITL_3600_Update Ext Alert.txt
Items: (3 entries)
0:
Bounds: x1=270, y1=100, x2=330, y2=120
Type: 4
Info: 'Proceed'
1:
Bounds: x1=190, y1=100, x2=250, y2=120
Type: 4
Info: 'Cancel'
2:
Bounds: x1=82, y1=3, x2=330, y2=83
Type: -120
Info: 'Number or placement of pins of new type does not match existing types "^1". Updating may cause some pins to be disconnected.'
DITL_2814_Attach Ext.txt
Items: (11 entries)
0:
Bounds: x1=262, y1=167, x2=322, y2=187
Type: 4
Info: 'OK'
1:
Bounds: x1=262, y1=137, x2=322, y2=157
Type: 4
Info: 'Cancel'
2:
Bounds: x1=105, y1=167, x2=240, y2=187
Type: 4
Info: 'Select Design File...'
3:
Bounds: x1=35, y1=167, x2=95, y2=187
Type: 4
Info: 'Clear'
4:
Bounds: x1=12, y1=120, x2=232, y2=136
Type: 6
Info: 'Load new subcircuit'
5:
Bounds: x1=12, y1=140, x2=232, y2=156
Type: 6
Info: 'Set external reference only'
6:
Bounds: x1=3, y1=2, x2=312, y2=51
Type: -120
Info: 'Attach an external design file as this device's subcircuit. WARNING: This also affects all other devices of the same type in this design.'
7:
Bounds: x1=8, y1=58, x2=316, y2=74
Type: 8
Info: 'External file name: ^0'
8:
Bounds: x1=8, y1=74, x2=316, y2=90
Type: 8
Info: 'Directory path: ^1'
9:
Bounds: x1=8, y1=90, x2=316, y2=106
Type: 8
Info: 'Status: ^2'
10:
Bounds: x1=4, y1=56, x2=320, y2=108
Type: 64
Info: ','
DITL_2813_Clear Ext.txt
Items: (5 entries)
0:
Bounds: x1=226, y1=141, x2=286, y2=161
Type: 4
Info: 'Proceed'
1:
Bounds: x1=151, y1=141, x2=211, y2=161
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=90, x2=232, y2=106
Type: 6
Info: 'All devices in entire design'
3:
Bounds: x1=12, y1=110, x2=289, y2=126
Type: 6
Info: 'Selected devices in current circuit only'
4:
Bounds: x1=3, y1=2, x2=289, y2=82
Type: -120
Info: 'Discard subcircuits from all devices with an external file reference. Devices without an external reference will be left untouched. WARNING: This cannot be undone!!!'
DITL_2812_Update Ext.txt
Items: (5 entries)
0:
Bounds: x1=266, y1=136, x2=326, y2=156
Type: 4
Info: 'Proceed'
1:
Bounds: x1=191, y1=136, x2=251, y2=156
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=80, x2=232, y2=96
Type: 6
Info: 'All devices in entire design'
3:
Bounds: x1=12, y1=100, x2=289, y2=116
Type: 6
Info: 'Selected devices in current circuit only'
4:
Bounds: x1=3, y1=2, x2=330, y2=67
Type: -120
Info: 'Update device subcircuits using the external file references in attribute fields ExtCctName and ExtCctPath. Devices without an external reference or that are up to date will be ignored.'
DITL_2810_Place Subcircuit.txt
Items: (4 entries)
0:
Bounds: x1=290, y1=225, x2=350, y2=245
Type: 4
Info: 'OK'
1:
Bounds: x1=213, y1=225, x2=268, y2=245
Type: 4
Info: 'Cancel'
2:
Bounds: x1=5, y1=71, x2=321, y2=213
Type: 0
Info: ''
3:
Bounds: x1=5, y1=3, x2=353, y2=68
Type: -120
Info: 'Select one of the open designs to be placed in the current design as a subcircuit block. A symbol will be auto-generated and a copy of the select circuit attached. The selected circuit will not be modified.'
DITL_2800_Update Ext Alert.txt
Items: (2 entries)
0:
Bounds: x1=270, y1=100, x2=330, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=82, y1=3, x2=330, y2=83
Type: -120
Info: 'Update completed.Out of a total of ^0 types scanned: ^1 were already up to date ^2 were updated ^3 were not updated due to errors.'
DITL_2200.txt
Items: (26 entries)
0:
Bounds: x1=225, y1=250, x2=285, y2=270
Type: 4
Info: 'Done'
1:
Bounds: x1=75, y1=250, x2=135, y2=270
Type: 4
Info: 'Cancel'
2:
Bounds: x1=150, y1=249, x2=210, y2=269
Type: 4
Info: 'Apply'
3:
Bounds: x1=180, y1=69, x2=278, y2=89
Type: 4
Info: 'Border Text...'
4:
Bounds: x1=104, y1=2, x2=191, y2=20
Type: 6
Info: 'This page'
5:
Bounds: x1=198, y1=2, x2=285, y2=20
Type: 6
Info: 'All pages'
6:
Bounds: x1=6, y1=22, x2=181, y2=38
Type: 5
Info: 'Draw background grid'
7:
Bounds: x1=6, y1=58, x2=174, y2=74
Type: 5
Info: 'Draw default border'
8:
Bounds: x1=6, y1=40, x2=188, y2=56
Type: 5
Info: 'Print background grid'
9:
Bounds: x1=6, y1=76, x2=173, y2=92
Type: 5
Info: 'Print default border'
10:
Bounds: x1=5, y1=121, x2=132, y2=140
Type: 6
Info: 'Use Page Setup'
11:
Bounds: x1=5, y1=100, x2=132, y2=116
Type: 5
Info: 'Auto-expand'
12:
Bounds: x1=5, y1=141, x2=133, y2=159
Type: 6
Info: 'Fixed Sheet Size'
13:
Bounds: x1=5, y1=162, x2=250, y2=178
Type: 5
Info: 'Fit to single sheet when printing'
14:
Bounds: x1=6, y1=197, x2=114, y2=217
Type: 6
Info: 'Sheet Origin'
15:
Bounds: x1=6, y1=216, x2=125, y2=236
Type: 6
Info: 'A1 Far Corner'
16:
Bounds: x1=126, y1=197, x2=239, y2=217
Type: 6
Info: 'B2 Far Corner'
17:
Bounds: x1=126, y1=216, x2=257, y2=236
Type: 6
Info: 'Sheet Far Corner'
18:
Bounds: x1=181, y1=124, x2=198, y2=141
Type: 6
Info: ''
19:
Bounds: x1=254, y1=124, x2=271, y2=141
Type: 6
Info: ''
20:
Bounds: x1=247, y1=45, x2=280, y2=60
Type: 16
Info: ''
21:
Bounds: x1=5, y1=3, x2=95, y2=20
Type: -120
Info: 'Sheet Setup'
22:
Bounds: x1=3, y1=182, x2=273, y2=199
Type: -120
Info: 'Click on the following reference points:'
23:
Bounds: x1=191, y1=25, x2=286, y2=42
Type: -120
Info: 'Grid divisions'
24:
Bounds: x1=231, y1=101, x2=281, y2=154
Type: -64
Info: '¿'
25:
Bounds: x1=157, y1=101, x2=207, y2=154
Type: -64
Info: '¡'
DITL_1901_Package Error.txt
Items: (10 entries)
0:
Bounds: x1=233, y1=137, x2=333, y2=157
Type: 4
Info: 'Continue'
1:
Bounds: x1=233, y1=219, x2=333, y2=239
Type: 4
Info: 'Abort'
2:
Bounds: x1=233, y1=178, x2=333, y2=198
Type: 4
Info: 'Ignore Errors'
3:
Bounds: x1=11, y1=172, x2=174, y2=205
Type: -120
Info: 'Continue processing and ignore errors'
4:
Bounds: x1=11, y1=213, x2=186, y2=246
Type: -120
Info: 'Stop processing and leave packaging disabled'
5:
Bounds: x1=9, y1=167, x2=358, y2=168
Type: -64
Info: '.'
6:
Bounds: x1=9, y1=207, x2=358, y2=208
Type: -64
Info: '.'
7:
Bounds: x1=81, y1=4, x2=334, y2=120
Type: -120
Info: '^0^1^2^3'
8:
Bounds: x1=9, y1=127, x2=358, y2=128
Type: -64
Info: '.'
9:
Bounds: x1=11, y1=134, x2=172, y2=165
Type: -120
Info: 'Continue processing and report errors'
DITL_1900.txt
Items: (4 entries)
0:
Bounds: x1=23, y1=80, x2=96, y2=100
Type: 4
Info: 'Remove'
1:
Bounds: x1=23, y1=112, x2=96, y2=132
Type: 4
Info: 'Cancel'
2:
Bounds: x1=177, y1=112, x2=250, y2=132
Type: 4
Info: 'Leave'
3:
Bounds: x1=60, y1=2, x2=261, y2=65
Type: -120
Info: 'This block has been assigned package name ^1. Do you want to remove it before creating an internal circuit?'
DITL_1803_Add Pins.txt
Items: (8 entries)
0:
Bounds: x1=155, y1=204, x2=215, y2=224
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=204, x2=140, y2=224
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=26, x2=218, y2=106
Type: 16
Info: ''
3:
Bounds: x1=20, y1=132, x2=106, y2=150
Type: 6
Info: 'Input'
4:
Bounds: x1=20, y1=150, x2=106, y2=168
Type: 6
Info: 'Output'
5:
Bounds: x1=20, y1=168, x2=131, y2=186
Type: 6
Info: 'Bidirectional'
6:
Bounds: x1=6, y1=2, x2=208, y2=21
Type: -120
Info: 'Pin list (e.g. CLK,EN,D0..7):'
7:
Bounds: x1=6, y1=114, x2=81, y2=130
Type: -120
Info: 'Pin Type:'
DITL_1802.txt
Items: (6 entries)
0:
Bounds: x1=156, y1=150, x2=216, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=150, x2=141, y2=170
Type: 4
Info: 'Cancel'
2:
Bounds: x1=17, y1=29, x2=213, y2=106
Type: 16
Info: ''
3:
Bounds: x1=174, y1=121, x2=211, y2=137
Type: 16
Info: ''
4:
Bounds: x1=6, y1=2, x2=208, y2=21
Type: -120
Info: 'Pin list (e.g. D0..7):'
5:
Bounds: x1=12, y1=121, x2=168, y2=137
Type: -120
Info: 'Pin spacing (grid units)'
DITL_1801_Add Sigs.txt
Items: (4 entries)
0:
Bounds: x1=148, y1=120, x2=208, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=120, x2=133, y2=140
Type: 4
Info: 'Cancel'
2:
Bounds: x1=17, y1=29, x2=213, y2=106
Type: 16
Info: ''
3:
Bounds: x1=6, y1=2, x2=208, y2=21
Type: -120
Info: 'Signal list (e.g. D0..7):'
DITL_1800_Bus Pin Info.txt
Items: (14 entries)
0:
Bounds: x1=250, y1=230, x2=358, y2=250
Type: 4
Info: 'Done'
1:
Bounds: x1=250, y1=201, x2=358, y2=221
Type: 4
Info: 'Cancel'
2:
Bounds: x1=5, y1=20, x2=95, y2=216
Type: -128
Info: ''
3:
Bounds: x1=125, y1=20, x2=212, y2=216
Type: -128
Info: ''
4:
Bounds: x1=250, y1=8, x2=358, y2=28
Type: 4
Info: 'Join'
5:
Bounds: x1=250, y1=32, x2=358, y2=52
Type: 4
Info: 'Join Sequential'
6:
Bounds: x1=250, y1=63, x2=358, y2=83
Type: 4
Info: 'Add Pins...'
7:
Bounds: x1=250, y1=87, x2=358, y2=107
Type: 4
Info: 'Delete Pins...'
8:
Bounds: x1=250, y1=111, x2=358, y2=131
Type: 4
Info: 'Pin Info...'
9:
Bounds: x1=250, y1=143, x2=358, y2=163
Type: 4
Info: 'Add Bus Sigs...'
10:
Bounds: x1=250, y1=167, x2=358, y2=187
Type: 4
Info: 'Signal Info...'
11:
Bounds: x1=13, y1=228, x2=199, y2=244
Type: 5
Info: 'Show bus pin annotation'
12:
Bounds: x1=5, y1=2, x2=103, y2=19
Type: -120
Info: 'Pins in Bus Pin'
13:
Bounds: x1=125, y1=1, x2=229, y2=18
Type: -120
Info: 'Signals in Bus'
DITL_1311.txt
Items: (6 entries)
0:
Bounds: x1=136, y1=94, x2=196, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=94, x2=122, y2=114
Type: 4
Info: 'Cancel'
2:
Bounds: x1=33, y1=25, x2=134, y2=45
Type: 5
Info: 'Draw Frame'
3:
Bounds: x1=33, y1=45, x2=179, y2=65
Type: 5
Info: 'Make background'
4:
Bounds: x1=33, y1=65, x2=181, y2=85
Type: 5
Info: 'Make border item'
5:
Bounds: x1=13, y1=3, x2=125, y2=22
Type: -120
Info: 'Picture Options'
DITL_1310.txt
Items: (8 entries)
0:
Bounds: x1=101, y1=144, x2=161, y2=164
Type: 4
Info: 'OK'
1:
Bounds: x1=18, y1=144, x2=78, y2=164
Type: 4
Info: 'Cancel'
2:
Bounds: x1=38, y1=109, x2=144, y2=130
Type: 4
Info: 'Text Specs...'
3:
Bounds: x1=34, y1=20, x2=135, y2=40
Type: 5
Info: 'Draw Frame'
4:
Bounds: x1=34, y1=40, x2=192, y2=60
Type: 5
Info: 'Rule Between Lines'
5:
Bounds: x1=34, y1=60, x2=192, y2=80
Type: 5
Info: 'Make background'
6:
Bounds: x1=34, y1=80, x2=192, y2=100
Type: 5
Info: 'Make border item'
7:
Bounds: x1=6, y1=2, x2=91, y2=21
Type: -120
Info: 'Text Options'
DITL_1308_Part Type Info.txt
Items: (15 entries)
0:
Bounds: x1=316, y1=240, x2=376, y2=260
Type: 4
Info: 'Go To'
1:
Bounds: x1=316, y1=207, x2=376, y2=227
Type: 4
Info: 'Cancel'
2:
Bounds: x1=188, y1=3, x2=353, y2=19
Type: -120
Info: ''
3:
Bounds: x1=114, y1=28, x2=221, y2=44
Type: -120
Info: ''
4:
Bounds: x1=118, y1=45, x2=225, y2=61
Type: -120
Info: ''
5:
Bounds: x1=93, y1=62, x2=200, y2=78
Type: -120
Info: ''
6:
Bounds: x1=173, y1=79, x2=240, y2=95
Type: -120
Info: ''
7:
Bounds: x1=213, y1=96, x2=280, y2=112
Type: -120
Info: ''
8:
Bounds: x1=8, y1=120, x2=270, y2=264
Type: -128
Info: ''
9:
Bounds: x1=8, y1=62, x2=90, y2=78
Type: -120
Info: 'Checksum:'
10:
Bounds: x1=8, y1=3, x2=186, y2=19
Type: -120
Info: 'Information on part type:'
11:
Bounds: x1=8, y1=28, x2=110, y2=44
Type: -120
Info: 'Primitive Type:'
12:
Bounds: x1=8, y1=45, x2=114, y2=61
Type: -120
Info: 'Subcircuit size:'
13:
Bounds: x1=8, y1=79, x2=170, y2=95
Type: -120
Info: 'Number of times used:'
14:
Bounds: x1=8, y1=96, x2=210, y2=112
Type: -120
Info: 'Number of physical instances:'
DITL_1307_PortConn Info.txt
Items: (7 entries)
0:
Bounds: x1=287, y1=128, x2=347, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=287, y1=97, x2=347, y2=117
Type: 4
Info: 'Cancel'
2:
Bounds: x1=81, y1=128, x2=155, y2=148
Type: 4
Info: 'Next Pin'
3:
Bounds: x1=172, y1=128, x2=250, y2=148
Type: 4
Info: 'Prev Pin'
4:
Bounds: x1=8, y1=4, x2=345, y2=36
Type: -120
Info: 'Information on pin ^0 port connector ^1'
5:
Bounds: x1=8, y1=47, x2=310, y2=63
Type: -120
Info: 'Associated parent pin: ^2'
6:
Bounds: x1=8, y1=68, x2=350, y2=84
Type: -120
Info: 'Port type: ^3'
DITL_1306_Device Report Info.txt
Items: (6 entries)
0:
Bounds: x1=103, y1=108, x2=163, y2=128
Type: 4
Info: 'OK'
1:
Bounds: x1=41, y1=108, x2=91, y2=128
Type: 4
Info: 'Cancel'
2:
Bounds: x1=16, y1=35, x2=162, y2=51
Type: 6
Info: 'Omit from report'
3:
Bounds: x1=16, y1=55, x2=161, y2=71
Type: 6
Info: 'Report this device'
4:
Bounds: x1=16, y1=75, x2=160, y2=91
Type: 6
Info: 'Report subcircuit'
5:
Bounds: x1=7, y1=8, x2=172, y2=26
Type: -120
Info: 'Device Reporting Options'
DITL_1305_Package Info.txt
Items: (8 entries)
0:
Bounds: x1=193, y1=132, x2=253, y2=152
Type: 4
Info: 'OK'
1:
Bounds: x1=128, y1=133, x2=178, y2=153
Type: 4
Info: 'Cancel'
2:
Bounds: x1=16, y1=32, x2=258, y2=48
Type: 6
Info: 'Auto-assign package and unit'
3:
Bounds: x1=16, y1=50, x2=262, y2=66
Type: 6
Info: 'Lock and check package and unit'
4:
Bounds: x1=16, y1=68, x2=210, y2=84
Type: 6
Info: 'Lock and don't check'
5:
Bounds: x1=16, y1=86, x2=223, y2=102
Type: 6
Info: 'Ignore package and unit'
6:
Bounds: x1=16, y1=104, x2=215, y2=120
Type: 6
Info: 'Package subcircuit'
7:
Bounds: x1=9, y1=6, x2=133, y2=23
Type: -120
Info: 'Packaging Options'
DITL_1304_Bus Info.txt
Items: (7 entries)
0:
Bounds: x1=274, y1=240, x2=334, y2=260
Type: 4
Info: 'OK'
1:
Bounds: x1=274, y1=210, x2=334, y2=230
Type: 4
Info: 'Cancel'
2:
Bounds: x1=134, y1=240, x2=264, y2=260
Type: 4
Info: 'Bus Attributes...'
3:
Bounds: x1=134, y1=210, x2=264, y2=230
Type: 4
Info: 'Signal Info...'
4:
Bounds: x1=3, y1=47, x2=316, y2=194
Type: -128
Info: ''
5:
Bounds: x1=3, y1=3, x2=333, y2=21
Type: -120
Info: 'Bus: ^0'
6:
Bounds: x1=3, y1=29, x2=93, y2=45
Type: -120
Info: 'Bus Signals:'
DITL_1303_Signal Info.txt
Items: (11 entries)
0:
Bounds: x1=200, y1=86, x2=281, y2=106
Type: 4
Info: 'OK'
1:
Bounds: x1=131, y1=86, x2=181, y2=106
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=86, x2=113, y2=106
Type: 4
Info: 'Attributes...'
3:
Bounds: x1=200, y1=54, x2=281, y2=74
Type: 4
Info: 'Pin List...'
4:
Bounds: x1=6, y1=27, x2=144, y2=45
Type: 5
Info: 'Omit from report'
5:
Bounds: x1=98, y1=5, x2=201, y2=21
Type: -120
Info: ''
6:
Bounds: x1=86, y1=51, x2=115, y2=66
Type: 16
Info: ''
7:
Bounds: x1=480, y1=27, x2=560, y2=45
Type: -120
Info: ''
8:
Bounds: x1=6, y1=5, x2=97, y2=21
Type: -120
Info: 'Signal Name:'
9:
Bounds: x1=460, y1=27, x2=580, y2=45
Type: -120
Info: 'Token Number:'
10:
Bounds: x1=7, y1=51, x2=81, y2=67
Type: -120
Info: 'Line width'
DITL_1302_Device Info.txt
Items: (19 entries)
0:
Bounds: x1=352, y1=162, x2=412, y2=182
Type: 4
Info: 'OK'
1:
Bounds: x1=267, y1=162, x2=327, y2=182
Type: 4
Info: 'Cancel'
2:
Bounds: x1=267, y1=83, x2=412, y2=103
Type: 4
Info: 'Device Attributes...'
3:
Bounds: x1=267, y1=107, x2=412, y2=127
Type: 4
Info: 'Pin Info...'
4:
Bounds: x1=267, y1=59, x2=412, y2=79
Type: 4
Info: 'Packaging Options...'
5:
Bounds: x1=267, y1=35, x2=412, y2=55
Type: 4
Info: 'Report Options...'
6:
Bounds: x1=267, y1=131, x2=412, y2=151
Type: 4
Info: 'Part Type Info...'
7:
Bounds: x1=8, y1=117, x2=170, y2=133
Type: 5
Info: 'Show pin numbers'
8:
Bounds: x1=8, y1=136, x2=197, y2=152
Type: 5
Info: 'Lock opening subcircuit'
9:
Bounds: x1=173, y1=3, x2=353, y2=19
Type: -120
Info: ''
10:
Bounds: x1=88, y1=28, x2=195, y2=44
Type: -120
Info: ''
11:
Bounds: x1=114, y1=46, x2=221, y2=62
Type: -120
Info: ''
12:
Bounds: x1=114, y1=64, x2=221, y2=80
Type: -120
Info: ''
13:
Bounds: x1=118, y1=82, x2=225, y2=98
Type: -120
Info: ''
14:
Bounds: x1=8, y1=64, x2=114, y2=80
Type: -120
Info: 'Token Number:'
15:
Bounds: x1=8, y1=3, x2=166, y2=19
Type: -120
Info: 'Information on device:'
16:
Bounds: x1=8, y1=28, x2=82, y2=44
Type: -120
Info: 'Part Type:'
17:
Bounds: x1=8, y1=46, x2=110, y2=62
Type: -120
Info: 'Primitive Type:'
18:
Bounds: x1=8, y1=82, x2=114, y2=98
Type: -120
Info: 'Subcircuit size:'
DITL_1301_Pin Info.txt
Items: (13 entries)
0:
Bounds: x1=266, y1=126, x2=366, y2=146
Type: 4
Info: 'OK'
1:
Bounds: x1=266, y1=96, x2=366, y2=116
Type: 4
Info: 'Cancel'
2:
Bounds: x1=266, y1=69, x2=366, y2=89
Type: 4
Info: 'Attributes...'
3:
Bounds: x1=266, y1=42, x2=366, y2=62
Type: 4
Info: 'Bus Pin Info...'
4:
Bounds: x1=76, y1=126, x2=150, y2=146
Type: 4
Info: 'Next Pin'
5:
Bounds: x1=167, y1=126, x2=245, y2=146
Type: 4
Info: 'Prev Pin'
6:
Bounds: x1=167, y1=29, x2=243, y2=45
Type: 5
Info: 'Visible'
7:
Bounds: x1=96, y1=29, x2=151, y2=45
Type: -112
Info: ''
8:
Bounds: x1=8, y1=4, x2=384, y2=22
Type: -120
Info: 'Information on pin ^0 device ^1'
9:
Bounds: x1=8, y1=75, x2=250, y2=91
Type: -120
Info: 'Pin sequence number: ^2'
10:
Bounds: x1=8, y1=56, x2=250, y2=72
Type: -120
Info: 'Pin type: ^3'
11:
Bounds: x1=8, y1=29, x2=91, y2=46
Type: -120
Info: 'Pin Number'
12:
Bounds: x1=9, y1=94, x2=258, y2=110
Type: 8
Info: 'No port association'
DITL_1202.txt
Items: (6 entries)
0:
Bounds: x1=346, y1=242, x2=406, y2=262
Type: 4
Info: 'Sorry!'
1:
Bounds: x1=73, y1=2, x2=413, y2=37
Type: -120
Info: 'Warning: The following internal error was detected during the last operation:'
2:
Bounds: x1=7, y1=125, x2=389, y2=159
Type: -120
Info: 'The severity rating of this error is HIGH. Data is very likely to be corrupted if you continue editing.'
Info: 'Call our Technical Support department if you require assistance.'
DITL_817_Make Unique.txt
Items: (5 entries)
0:
Bounds: x1=282, y1=115, x2=342, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=203, y1=115, x2=263, y2=135
Type: 4
Info: 'Cancel'
2:
Bounds: x1=129, y1=81, x2=339, y2=99
Type: -112
Info: ''
3:
Bounds: x1=8, y1=81, x2=122, y2=99
Type: -120
Info: 'New type name'
4:
Bounds: x1=9, y1=5, x2=342, y2=73
Type: -120
Info: 'This will make the selected device unique so that it will be disassociated from the original library part and modifications to its internal circuit will not affect others of the same type in this design.'
DITL_816_Ext Cct Probs.txt
Items: (3 entries)
0:
Bounds: x1=243, y1=34, x2=354, y2=54
Type: 4
Info: 'Locate Circuit'
1:
Bounds: x1=82, y1=34, x2=227, y2=54
Type: 4
Info: 'Load Without Circuit'
2:
Bounds: x1=9, y1=5, x2=399, y2=24
Type: -120
Info: 'Can't find external circuit file "^0"'
DITL_815_Dup Type Name.txt
Items: (13 entries)
0:
Bounds: x1=284, y1=217, x2=476, y2=237
Type: 4
Info: 'Use old'
1:
Bounds: x1=416, y1=20, x2=476, y2=40
Type: 4
Info: 'Cancel'
2:
Bounds: x1=284, y1=99, x2=476, y2=119
Type: 4
Info: 'Use new and change name'
3:
Bounds: x1=284, y1=166, x2=476, y2=186
Type: 4
Info: 'Use new with existing name'
4:
Bounds: x1=131, y1=100, x2=267, y2=118
Type: -112
Info: ''
5:
Bounds: x1=5, y1=100, x2=119, y2=118
Type: -120
Info: 'New type name'
6:
Bounds: x1=5, y1=5, x2=357, y2=39
Type: -120
Info: 'A device type with the same name but different characteristics has already been used in this design.'
7:
Bounds: x1=5, y1=194, x2=475, y2=195
Type: -64
Info: ','
8:
Bounds: x1=5, y1=49, x2=475, y2=50
Type: -64
Info: ','
9:
Bounds: x1=5, y1=130, x2=475, y2=131
Type: -64
Info: ','
10:
Bounds: x1=5, y1=136, x2=262, y2=187
Type: -120
Info: 'Use the new type and keep the conflicting name. WARNING: This may create errors in netlists and reports.'
11:
Bounds: x1=5, y1=54, x2=275, y2=90
Type: -120
Info: 'Use the new type, but rename it to avoid a conflict with the existing one.'
12:
Bounds: x1=5, y1=201, x2=253, y2=237
Type: -120
Info: 'Use the type definition already existing in the design.'
DITL_813.txt
Items: (4 entries)
0:
Bounds: x1=201, y1=158, x2=261, y2=178
Type: 4
Info: 'Select'
1:
Bounds: x1=201, y1=125, x2=261, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=22, x2=170, y2=182
Type: -128
Info: ''
3:
Bounds: x1=9, y1=3, x2=260, y2=16
Type: -120
Info: 'Select the part to update from'
DITL_812.txt
Items: (4 entries)
0:
Bounds: x1=201, y1=158, x2=261, y2=178
Type: 4
Info: 'Select'
1:
Bounds: x1=201, y1=125, x2=261, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=22, x2=170, y2=182
Type: -128
Info: ''
3:
Bounds: x1=9, y1=3, x2=170, y2=16
Type: -120
Info: 'Select a source library'
DITL_811.txt
Items: (9 entries)
0:
Bounds: x1=201, y1=165, x2=261, y2=185
Type: 4
Info: 'Save'
1:
Bounds: x1=201, y1=130, x2=261, y2=150
Type: 4
Info: 'Cancel'
2:
Bounds: x1=200, y1=100, x2=260, y2=120
Type: 4
Info: 'New Lib'
3:
Bounds: x1=10, y1=7, x2=176, y2=27
Type: 5
Info: 'Internal circuit'
4:
Bounds: x1=10, y1=30, x2=260, y2=46
Type: 6
Info: 'All attributes in selected instance'
5:
Bounds: x1=10, y1=46, x2=274, y2=62
Type: 6
Info: 'Attributes in original definition only'
6:
Bounds: x1=100, y1=68, x2=260, y2=86
Type: -112
Info: ''
7:
Bounds: x1=9, y1=94, x2=170, y2=190
Type: -128
Info: ''
8:
Bounds: x1=9, y1=68, x2=90, y2=86
Type: -120
Info: 'Saved name'
DITL_810_Update from Lib.txt
Items: (16 entries)
0:
Bounds: x1=339, y1=219, x2=399, y2=239
Type: 4
Info: 'OK'
1:
Bounds: x1=339, y1=189, x2=399, y2=209
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=59, x2=160, y2=77
Type: 8
Info: ''
3:
Bounds: x1=15, y1=105, x2=230, y2=123
Type: 8
Info: ''
4:
Bounds: x1=15, y1=151, x2=235, y2=169
Type: 8
Info: ''
5:
Bounds: x1=15, y1=173, x2=310, y2=189
Type: 5
Info: 'Recalculate displayed attribute positions'
6:
Bounds: x1=15, y1=218, x2=163, y2=236
Type: 8
Info: ''
7:
Bounds: x1=9, y1=131, x2=316, y2=193
Type: -64
Info: ','
8:
Bounds: x1=9, y1=38, x2=316, y2=81
Type: -64
Info: ','
9:
Bounds: x1=9, y1=85, x2=316, y2=127
Type: -64
Info: ','
10:
Bounds: x1=6, y1=2, x2=310, y2=34
Type: -120
Info: 'Update Devices from a New Library Definition. WARNING: This cannot be undone!'
11:
Bounds: x1=12, y1=40, x2=181, y2=57
Type: 8
Info: 'Source Library Options'
12:
Bounds: x1=12, y1=87, x2=132, y2=103
Type: -120
Info: 'Scope Options'
13:
Bounds: x1=12, y1=133, x2=179, y2=149
Type: -120
Info: 'Attribute Update Options'
14:
Bounds: x1=9, y1=197, x2=318, y2=240
Type: -64
Info: ','
15:
Bounds: x1=12, y1=200, x2=206, y2=216
Type: -120
Info: 'Internal Circuit Update Options'
DITL_805_Update from Lib Small.txt
Items: (7 entries)
0:
Bounds: x1=10, y1=54, x2=120, y2=74
Type: 4
Info: 'Update'
1:
Bounds: x1=10, y1=166, x2=120, y2=186
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=125, x2=120, y2=145
Type: 4
Info: 'More Options'
3:
Bounds: x1=135, y1=54, x2=413, y2=120
Type: -120
Info: 'Update all other instances of this type. Each instance will keep its existing internal circuit (if any) and any attribute values that have been modified.'
4:
Bounds: x1=134, y1=125, x2=355, y2=170
Type: -120
Info: 'Switch to full Update from Lib options box.'
5:
Bounds: x1=135, y1=168, x2=242, y2=185
Type: -120
Info: 'Don't update.'
6:
Bounds: x1=67, y1=4, x2=413, y2=36
Type: -120
Info: 'The symbol for type ^1 has been edited.'
DITL_804.txt
Items: (8 entries)
0:
Bounds: x1=9, y1=90, x2=69, y2=110
Type: 4
Info: 'Update'
1:
Bounds: x1=10, y1=138, x2=70, y2=158
Type: 4
Info: 'New'
2:
Bounds: x1=9, y1=479, x2=69, y2=499
Type: -124
Info: 'Revert'
3:
Bounds: x1=8, y1=179, x2=68, y2=199
Type: 4
Info: 'Cancel'
4:
Bounds: x1=78, y1=83, x2=247, y2=118
Type: -120
Info: 'Update all other instances of this type'
5:
Bounds: x1=77, y1=129, x2=236, y2=164
Type: -120
Info: 'Create new type for this instance'
6:
Bounds: x1=79, y1=177, x2=179, y2=204
Type: -120
Info: 'Cancel close'
7:
Bounds: x1=8, y1=61, x2=108, y2=80
Type: -120
Info: 'Close action:'
DITL_803.txt
Items: (3 entries)
0:
Bounds: x1=146, y1=117, x2=235, y2=137
Type: 4
Info: 'Select New'
1:
Bounds: x1=52, y1=117, x2=122, y2=137
Type: 4
Info: 'No Model'
2:
Bounds: x1=61, y1=5, x2=248, y2=106
Type: -120
Info: 'Device type ^1 contains invalid or obsolete behavioural model code. You can either locate a new MEDA code module or leave the type without a model.'
DITL_802.txt
Items: (5 entries)
0:
Bounds: x1=174, y1=73, x2=234, y2=93
Type: 4
Info: 'OK'
1:
Bounds: x1=84, y1=73, x2=144, y2=93
Type: 4
Info: 'Cancel'
2:
Bounds: x1=125, y1=42, x2=253, y2=60
Type: -112
Info: ''
3:
Bounds: x1=3, y1=2, x2=253, y2=33
Type: -120
Info: ''
4:
Bounds: x1=3, y1=42, x2=113, y2=60
Type: -120
Info: 'Type name'
DITL_801.txt
Items: (9 entries)
0:
Bounds: x1=9, y1=90, x2=69, y2=110
Type: 4
Info: 'Update'
1:
Bounds: x1=10, y1=138, x2=70, y2=158
Type: 4
Info: 'New'
2:
Bounds: x1=9, y1=179, x2=69, y2=199
Type: 4
Info: 'Revert'
3:
Bounds: x1=8, y1=221, x2=68, y2=241
Type: 4
Info: 'Cancel'
4:
Bounds: x1=78, y1=83, x2=247, y2=118
Type: -120
Info: 'Update all other instances of this type'
5:
Bounds: x1=77, y1=129, x2=236, y2=164
Type: -120
Info: 'Create new type for this instance'
6:
Bounds: x1=79, y1=223, x2=179, y2=241
Type: -120
Info: 'Cancel close'
7:
Bounds: x1=76, y1=173, x2=257, y2=208
Type: -120
Info: 'Abandon changes and revert to previous circuit'
8:
Bounds: x1=8, y1=61, x2=108, y2=80
Type: -120
Info: 'Close action:'
DITL_800.txt
Items: (4 entries)
0:
Bounds: x1=199, y1=83, x2=274, y2=103
Type: 4
Info: 'Continue'
1:
Bounds: x1=86, y1=83, x2=177, y2=103
Type: 4
Info: 'Abort Setup'
2:
Bounds: x1=11, y1=83, x2=71, y2=103
Type: 4
Info: 'Quit'
3:
Bounds: x1=59, y1=4, x2=277, y2=72
Type: -120
Info: 'Could not open library ^1. ^0'
DITL_711_AutoCheckpoint.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=87, x2=318, y2=107
Type: 4
Info: 'Checkpoint Now'
1:
Bounds: x1=12, y1=87, x2=182, y2=107
Type: 4
Info: 'Skip Until Next Time'
2:
Bounds: x1=12, y1=59, x2=182, y2=79
Type: 4
Info: 'Disable Auto-Checkpoint'
3:
Bounds: x1=65, y1=1, x2=318, y2=55
Type: -120
Info: '^1 minutes have elapsed since the design was last checkpointed. Do you want to checkpoint now?'
DITL_710_AutoBackup.txt
Items: (4 entries)
0:
Bounds: x1=178, y1=85, x2=278, y2=105
Type: 4
Info: 'Save Now'
1:
Bounds: x1=18, y1=85, x2=163, y2=105
Type: 4
Info: 'Skip Until Next Time'
2:
Bounds: x1=18, y1=57, x2=163, y2=77
Type: 4
Info: 'Disable Auto-Save'
3:
Bounds: x1=65, y1=1, x2=271, y2=50
Type: -120
Info: '^1 minutes have elapsed since the design was last saved. Do you want to save now?'
DITL_700.txt
Items: (14 entries)
0:
Bounds: x1=256, y1=138, x2=336, y2=156
Type: 4
Info: 'Open'
1:
Bounds: x1=571, y1=0, x2=589, y2=80
Type: 4
Info: ''
2:
Bounds: x1=256, y1=163, x2=336, y2=181
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=256, y1=68, x2=336, y2=86
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Drive'
6:
Bounds: x1=9, y1=40, x2=232, y2=186
Type: 0
Info: ''
7:
Bounds: x1=230, y1=40, x2=247, y2=186
Type: 0
Info: ''
8:
Bounds: x1=252, y1=124, x2=340, y2=125
Type: -128
Info: ''
9:
Bounds: x1=532, y1=0, x2=628, y2=101
Type: -120
Info: ''
10:
Bounds: x1=56, y1=190, x2=284, y2=206
Type: 5
Info: 'DesignWorks/Macintosh files'
11:
Bounds: x1=56, y1=206, x2=284, y2=222
Type: 5
Info: 'Files with names ending in .CCT'
12:
Bounds: x1=56, y1=222, x2=180, y2=238
Type: 5
Info: 'All other files'
13:
Bounds: x1=7, y1=190, x2=50, y2=206
Type: -120
Info: 'Show:'
DITL_622.txt
Items: (6 entries)
0:
Bounds: x1=274, y1=60, x2=334, y2=80
Type: 4
Info: 'OK'
1:
Bounds: x1=197, y1=60, x2=257, y2=80
Type: 4
Info: 'Cancel'
2:
Bounds: x1=4, y1=60, x2=80, y2=76
Type: 5
Info: 'Visible'
3:
Bounds: x1=4, y1=38, x2=220, y2=54
Type: 5
Info: 'Apply to all connected signals'
4:
Bounds: x1=184, y1=10, x2=337, y2=28
Type: -112
Info: ''
5:
Bounds: x1=3, y1=10, x2=171, y2=28
Type: -120
Info: 'Value for ^0'
DITL_621.txt
Items: (6 entries)
0:
Bounds: x1=174, y1=141, x2=234, y2=161
Type: 4
Info: 'OK'
1:
Bounds: x1=84, y1=141, x2=144, y2=161
Type: 4
Info: 'Cancel'
2:
Bounds: x1=4, y1=143, x2=80, y2=159
Type: 5
Info: 'Visible'
3:
Bounds: x1=8, y1=200, x2=244, y2=216
Type: 5
Info: 'Apply to all connected signals'
4:
Bounds: x1=110, y1=11, x2=253, y2=128
Type: -112
Info: ''
5:
Bounds: x1=3, y1=10, x2=103, y2=50
Type: -120
Info: 'Value for ^0'
DITL_620.txt
Items: (6 entries)
0:
Bounds: x1=274, y1=40, x2=334, y2=60
Type: 4
Info: 'OK'
1:
Bounds: x1=197, y1=40, x2=257, y2=60
Type: 4
Info: 'Cancel'
2:
Bounds: x1=7, y1=39, x2=83, y2=55
Type: 5
Info: 'Visible'
3:
Bounds: x1=8, y1=92, x2=244, y2=108
Type: 5
Info: 'Apply to all connected signals'
4:
Bounds: x1=184, y1=10, x2=337, y2=28
Type: -112
Info: ''
5:
Bounds: x1=3, y1=10, x2=170, y2=28
Type: -120
Info: 'Value for ^0'
DITL_616_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=540, y1=66, x2=620, y2=86
Type: -124
Info: 'New Field'
3:
Bounds: x1=527, y1=200, x2=653, y2=220
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=228, y1=132, x2=309, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=528, y1=132, x2=645, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=528, y1=149, x2=686, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=528, y1=166, x2=645, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_615_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=540, y1=66, x2=620, y2=86
Type: -124
Info: 'New Field'
3:
Bounds: x1=528, y1=204, x2=654, y2=224
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=228, y1=132, x2=309, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=528, y1=132, x2=645, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=528, y1=149, x2=686, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=528, y1=166, x2=645, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_614_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=540, y1=66, x2=620, y2=86
Type: -124
Info: 'New Field'
3:
Bounds: x1=220, y1=156, x2=346, y2=176
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=228, y1=132, x2=309, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=528, y1=132, x2=645, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=528, y1=149, x2=686, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=528, y1=166, x2=645, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_613_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=540, y1=66, x2=620, y2=86
Type: -124
Info: 'New Field'
3:
Bounds: x1=220, y1=156, x2=346, y2=176
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=228, y1=132, x2=309, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=528, y1=132, x2=645, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=528, y1=149, x2=686, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=528, y1=166, x2=645, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_612_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=240, y1=66, x2=320, y2=86
Type: 4
Info: 'New Field'
3:
Bounds: x1=520, y1=156, x2=646, y2=176
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=528, y1=132, x2=609, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=228, y1=132, x2=345, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=228, y1=149, x2=386, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=228, y1=166, x2=345, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_611_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=240, y1=10, x2=320, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=240, y1=38, x2=320, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=240, y1=66, x2=320, y2=86
Type: 4
Info: 'New Field'
3:
Bounds: x1=520, y1=156, x2=646, y2=176
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=528, y1=132, x2=609, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=228, y1=132, x2=345, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=228, y1=149, x2=386, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=228, y1=166, x2=345, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_605.txt
Items: (4 entries)
0:
Bounds: x1=123, y1=184, x2=313, y2=204
Type: 4
Info: 'Duplicate Definition Only'
1:
Bounds: x1=254, y1=151, x2=314, y2=171
Type: 4
Info: 'Cancel'
2:
Bounds: x1=122, y1=151, x2=239, y2=171
Type: 4
Info: 'Duplicate Data'
3:
Bounds: x1=57, y1=3, x2=342, y2=139
Type: -120
Info: 'Clicking the Duplicate Data button will create a new field definition and duplicate all data stored under this field name throughout the design. Duplicate Definition Only will create a new field definition similar to the original one but with empty data.'
DITL_604.txt
Items: (3 entries)
0:
Bounds: x1=171, y1=94, x2=231, y2=114
Type: 4
Info: 'Delete'
1:
Bounds: x1=98, y1=94, x2=158, y2=114
Type: 4
Info: 'Cancel'
2:
Bounds: x1=57, y1=4, x2=230, y2=79
Type: -120
Info: 'Warning: This will delete all data stored under this field name throughout the design!'
DITL_603.txt
Items: (3 entries)
0:
Bounds: x1=276, y1=147, x2=336, y2=167
Type: 4
Info: 'Merge'
1:
Bounds: x1=200, y1=147, x2=260, y2=167
Type: 4
Info: 'Cancel'
2:
Bounds: x1=67, y1=6, x2=330, y2=135
Type: -120
Info: 'That field name is already in use. You can merge the two fields by clicking the Merge button. This will move all data stored under field name ^0 to the name ^1 throughout the design. If ^1 already contains data, the old data will be lost.'
DITL_602_Attribute Definition.txt
Items: (22 entries)
0:
Bounds: x1=240, y1=229, x2=300, y2=249
Type: 4
Info: 'OK'
1:
Bounds: x1=170, y1=229, x2=230, y2=249
Type: 4
Info: 'Cancel'
2:
Bounds: x1=100, y1=229, x2=160, y2=249
Type: 4
Info: 'Delete'
3:
Bounds: x1=12, y1=229, x2=90, y2=249
Type: 4
Info: 'Duplicate'
4:
Bounds: x1=140, y1=4, x2=300, y2=20
Type: 5
Info: 'Keep with instance'
5:
Bounds: x1=140, y1=20, x2=309, y2=36
Type: 5
Info: 'Group with Name'
6:
Bounds: x1=140, y1=36, x2=300, y2=52
Type: 5
Info: 'Show field name'
7:
Bounds: x1=140, y1=52, x2=320, y2=68
Type: 5
Info: 'Allow carriage returns'
8:
Bounds: x1=140, y1=68, x2=320, y2=84
Type: 5
Info: 'Rotate text with object'
9:
Bounds: x1=140, y1=84, x2=290, y2=100
Type: 5
Info: 'Visible by default'
10:
Bounds: x1=140, y1=100, x2=290, y2=116
Type: 5
Info: 'In primary list'
11:
Bounds: x1=140, y1=116, x2=320, y2=132
Type: 5
Info: 'Link value list to Part'
12:
Bounds: x1=140, y1=156, x2=216, y2=172
Type: 5
Info: 'Devices'
13:
Bounds: x1=140, y1=172, x2=215, y2=188
Type: 5
Info: 'Signals'
14:
Bounds: x1=228, y1=156, x2=291, y2=172
Type: 5
Info: 'Pins'
15:
Bounds: x1=228, y1=172, x2=298, y2=188
Type: 5
Info: 'Design'
16:
Bounds: x1=6, y1=195, x2=134, y2=211
Type: 16
Info: ''
17:
Bounds: x1=259, y1=198, x2=310, y2=213
Type: 16
Info: ''
18:
Bounds: x1=4, y1=3, x2=100, y2=166
Type: 0
Info: ''
19:
Bounds: x1=4, y1=174, x2=84, y2=190
Type: -120
Info: 'Field name'
20:
Bounds: x1=139, y1=137, x2=302, y2=155
Type: -120
Info: 'Allowed in object types'
21:
Bounds: x1=139, y1=197, x2=254, y2=214
Type: -120
Info: 'Maximum length'
DITL_601_Attribute Value.txt
Items: (17 entries)
0:
Bounds: x1=250, y1=10, x2=310, y2=30
Type: 4
Info: 'Done'
1:
Bounds: x1=250, y1=38, x2=310, y2=58
Type: 4
Info: 'Cancel'
2:
Bounds: x1=240, y1=66, x2=320, y2=86
Type: 4
Info: 'New Field'
3:
Bounds: x1=220, y1=156, x2=346, y2=176
Type: 4
Info: 'Use Default Value'
4:
Bounds: x1=65, y1=274, x2=138, y2=294
Type: 4
Info: 'Next'
5:
Bounds: x1=203, y1=274, x2=271, y2=294
Type: 4
Info: 'Prev'
6:
Bounds: x1=228, y1=132, x2=309, y2=148
Type: 5
Info: 'Visible'
7:
Bounds: x1=228, y1=93, x2=345, y2=109
Type: 6
Info: 'Primary fields'
8:
Bounds: x1=228, y1=110, x2=328, y2=126
Type: 6
Info: 'All fields'
9:
Bounds: x1=228, y1=132, x2=345, y2=148
Type: 6
Info: 'Always Visible'
10:
Bounds: x1=228, y1=149, x2=386, y2=165
Type: 6
Info: 'Default Visibility'
11:
Bounds: x1=228, y1=166, x2=345, y2=182
Type: 6
Info: 'Never Visible'
12:
Bounds: x1=9, y1=209, x2=359, y2=263
Type: 16
Info: ''
13:
Bounds: x1=7, y1=7, x2=196, y2=166
Type: -128
Info: ''
14:
Bounds: x1=249, y1=186, x2=361, y2=202
Type: 8
Info: ''
15:
Bounds: x1=114, y1=184, x2=340, y2=203
Type: -120
Info: 'unnamed'
16:
Bounds: x1=9, y1=184, x2=110, y2=203
Type: -120
Info: 'Attributes for:'
DITL_502.txt
Items: (3 entries)
0:
Bounds: x1=235, y1=120, x2=295, y2=140
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=120, x2=220, y2=140
Type: 4
Info: 'No More Messages'
2:
Bounds: x1=79, y1=3, x2=297, y2=111
Type: -120
Info: '^0 ^1 ^2 ^3'
DITL_501_Quit Alert.txt
Items: (3 entries)
0:
Bounds: x1=240, y1=120, x2=290, y2=140
Type: 4
Info: 'Quit'
1:
Bounds: x1=120, y1=120, x2=210, y2=140
Type: 4
Info: 'Don't Quit'
2:
Bounds: x1=79, y1=3, x2=297, y2=111
Type: -120
Info: '^0 ^1 ^2 ^3'
DITL_500_Global Error.txt
Items: (3 entries)
0:
Bounds: x1=282, y1=169, x2=342, y2=189
Type: 4
Info: 'OK'
1:
Bounds: x1=82, y1=3, x2=348, y2=133
Type: -120
Info: 'The last operation was not completed successfully due to an error: ^0'
2:
Bounds: x1=82, y1=140, x2=348, y2=155
Type: -120
Info: 'Code: ^1^2^3'
DITL_455_Name Options - Signals.txt
Items: (7 entries)
0:
Bounds: x1=255, y1=106, x2=315, y2=126
Type: 4
Info: 'OK'
1:
Bounds: x1=184, y1=106, x2=244, y2=126
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=27, x2=316, y2=43
Type: 5
Info: 'Auto-assign a unique name in Name field'
3:
Bounds: x1=15, y1=47, x2=299, y2=63
Type: 5
Info: 'Make auto-assigned names visible'
4:
Bounds: x1=201, y1=77, x2=262, y2=91
Type: 16
Info: ''
5:
Bounds: x1=8, y1=3, x2=195, y2=21
Type: -120
Info: 'Signal Auto-naming Options'
6:
Bounds: x1=15, y1=75, x2=196, y2=91
Type: -120
Info: 'Default signal name prefix'
DITL_452_Name Options - Pure.txt
Items: (12 entries)
0:
Bounds: x1=365, y1=182, x2=425, y2=202
Type: 4
Info: 'OK'
1:
Bounds: x1=289, y1=182, x2=349, y2=202
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=35, x2=75, y2=51
Type: 6
Info: 'None'
3:
Bounds: x1=12, y1=58, x2=140, y2=74
Type: 6
Info: 'Auto Naming On'
4:
Bounds: x1=23, y1=93, x2=271, y2=109
Type: 5
Info: 'Make auto-assigned names visible'
5:
Bounds: x1=161, y1=120, x2=236, y2=136
Type: -112
Info: ''
6:
Bounds: x1=6, y1=4, x2=304, y2=21
Type: -120
Info: 'Auto-naming Options for Pure-mode Designs'
7:
Bounds: x1=73, y1=35, x2=321, y2=52
Type: -120
Info: '- No automatic assignment to Name.'
8:
Bounds: x1=141, y1=58, x2=427, y2=92
Type: -120
Info: '- A unique value will be assigned to Name for each symbol.'
9:
Bounds: x1=7, y1=29, x2=429, y2=170
Type: -64
Info: '-'
10:
Bounds: x1=13, y1=119, x2=155, y2=136
Type: -120
Info: 'Default name prefix'
11:
Bounds: x1=13, y1=146, x2=423, y2=162
Type: -120
Info: 'Note: Auto-packaging is not available in Pure-mode designs.'
DITL_451_Name Options - Physical.txt
Items: (20 entries)
0:
Bounds: x1=375, y1=289, x2=435, y2=309
Type: 4
Info: 'OK'
1:
Bounds: x1=299, y1=289, x2=359, y2=309
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=48, x2=75, y2=64
Type: 6
Info: 'None'
3:
Bounds: x1=12, y1=70, x2=140, y2=86
Type: 6
Info: 'Auto Naming On'
4:
Bounds: x1=13, y1=178, x2=71, y2=194
Type: 6
Info: 'None'
5:
Bounds: x1=13, y1=200, x2=161, y2=216
Type: 6
Info: 'Auto Packaging On'
6:
Bounds: x1=12, y1=130, x2=268, y2=147
Type: 5
Info: 'Make auto-assigned names visible'
7:
Bounds: x1=156, y1=111, x2=231, y2=127
Type: -112
Info: ''
8:
Bounds: x1=185, y1=257, x2=260, y2=273
Type: -112
Info: ''
9:
Bounds: x1=8, y1=3, x2=428, y2=20
Type: -120
Info: 'Auto-naming and Packaging Options for Physical-mode Designs'
10:
Bounds: x1=73, y1=48, x2=322, y2=64
Type: -120
Info: '- No automatic assignment to Name.'
11:
Bounds: x1=141, y1=70, x2=427, y2=104
Type: -120
Info: '- A unique value will be assigned to Name for each symbol.'
12:
Bounds: x1=159, y1=200, x2=429, y2=252
Type: -120
Info: '- Each symbol will be assigned to a package and the package name and unit will be placed in InstName and Unit.'
13:
Bounds: x1=7, y1=25, x2=434, y2=151
Type: -64
Info: '-'
14:
Bounds: x1=12, y1=256, x2=181, y2=273
Type: -120
Info: 'Default package prefix'
15:
Bounds: x1=13, y1=29, x2=185, y2=45
Type: -120
Info: 'Auto Name Assignment'
16:
Bounds: x1=12, y1=110, x2=149, y2=127
Type: -120
Info: 'Default name prefix'
17:
Bounds: x1=13, y1=158, x2=145, y2=174
Type: -120
Info: 'Auto Packaging'
18:
Bounds: x1=71, y1=178, x2=345, y2=194
Type: -120
Info: '- No automatic assignment to InstName.'
19:
Bounds: x1=7, y1=154, x2=434, y2=282
Type: -64
Info: '-'
DITL_450_Name Options - Flat.txt
Items: (13 entries)
0:
Bounds: x1=370, y1=223, x2=430, y2=243
Type: 4
Info: 'OK'
1:
Bounds: x1=294, y1=223, x2=354, y2=243
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=39, x2=73, y2=55
Type: 6
Info: 'None'
3:
Bounds: x1=10, y1=62, x2=138, y2=78
Type: 6
Info: 'Auto Naming On'
4:
Bounds: x1=10, y1=98, x2=158, y2=114
Type: 6
Info: 'Auto Packaging On'
5:
Bounds: x1=24, y1=158, x2=282, y2=174
Type: 5
Info: 'Make auto-assigned names visible'
6:
Bounds: x1=174, y1=189, x2=249, y2=205
Type: 16
Info: ''
7:
Bounds: x1=12, y1=189, x2=170, y2=205
Type: -120
Info: 'Default package prefix'
8:
Bounds: x1=6, y1=3, x2=394, y2=21
Type: -120
Info: 'Auto-naming and Packaging Options for Flat-mode Designs'
9:
Bounds: x1=6, y1=29, x2=430, y2=212
Type: -64
Info: '-'
10:
Bounds: x1=71, y1=39, x2=417, y2=56
Type: -120
Info: '- No modifications to Name on editing operations.'
11:
Bounds: x1=139, y1=62, x2=425, y2=96
Type: -120
Info: '- A unique value will be assigned to Name for each symbol.'
12:
Bounds: x1=157, y1=98, x2=427, y2=150
Type: -120
Info: '- Each symbol will be assigned to a package and the package name and unit will be placed in Name and Unit.'
DITL_436_Mode Change Alert.txt
Items: (4 entries)
0:
Bounds: x1=190, y1=100, x2=240, y2=120
Type: 4
Info: 'Save'
1:
Bounds: x1=104, y1=100, x2=154, y2=120
Type: 4
Info: 'Cancel'
2:
Bounds: x1=74, y1=70, x2=240, y2=90
Type: 4
Info: 'Proceed Without Saving'
3:
Bounds: x1=1, y1=1, x2=240, y2=70
Type: -120
Info: 'Warning these changes will cause data to be modified or deleted. Do you want to save before proceeding?'
DITL_433_PhysToPure.txt
Items: (4 entries)
0:
Bounds: x1=331, y1=154, x2=391, y2=174
Type: 4
Info: 'Proceed'
1:
Bounds: x1=260, y1=154, x2=318, y2=174
Type: 4
Info: 'Cancel'
2:
Bounds: x1=2, y1=2, x2=384, y2=68
Type: -120
Info: 'This will switch the design hierarchy mode from Physical to Pure. WARNING: This may cause instance data to be lost and does not make other changes which may be appropriate, depending on application.'
3:
Bounds: x1=2, y1=75, x2=391, y2=142
Type: -120
Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation. This will ensure that all required settings are changed and design checks are done.'
DITL_432_FlatToPure.txt
Items: (4 entries)
0:
Bounds: x1=326, y1=154, x2=386, y2=174
Type: 4
Info: 'Proceed'
1:
Bounds: x1=255, y1=154, x2=313, y2=174
Type: 4
Info: 'Cancel'
2:
Bounds: x1=2, y1=2, x2=384, y2=68
Type: -120
Info: 'This will switch the design hierarchy mode from Flat to Pure but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
3:
Bounds: x1=2, y1=75, x2=391, y2=142
Type: -120
Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation. This will ensure that all required settings are changed and design checks are done.'
DITL_431_PhysToFlat.txt
Items: (4 entries)
0:
Bounds: x1=338, y1=153, x2=398, y2=173
Type: 4
Info: 'Proceed'
1:
Bounds: x1=263, y1=153, x2=321, y2=173
Type: 4
Info: 'Cancel'
2:
Bounds: x1=2, y1=2, x2=384, y2=68
Type: -120
Info: 'This will switch the design hierarchy mode from Physical to Flat but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
3:
Bounds: x1=2, y1=75, x2=391, y2=142
Type: -120
Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation. This will ensure that all required settings are changed and design checks are done.'
DITL_430_FlatToPhys.txt
Items: (4 entries)
0:
Bounds: x1=330, y1=163, x2=390, y2=183
Type: 4
Info: 'Proceed'
1:
Bounds: x1=260, y1=163, x2=318, y2=183
Type: 4
Info: 'Cancel'
2:
Bounds: x1=2, y1=2, x2=384, y2=68
Type: -120
Info: 'This will switch the design hierarchy mode from Flat to Physical but does not make any other design changes that may be necessary in order for the design to operate correctly in the new mode.'
3:
Bounds: x1=2, y1=75, x2=391, y2=142
Type: -120
Info: 'Instead of using this command, we recommend using a hierarchy mode change script included in the design kit to perform this operation. This will ensure that all required settings are changed and design checks are done.'
DITL_421_Examples Dialog.txt
Items: (7 entries)
0:
Bounds: x1=253, y1=184, x2=353, y2=204
Type: 4
Info: 'Open...'
1:
Bounds: x1=253, y1=219, x2=353, y2=239
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=41, x2=214, y2=203
Type: -128
Info: ''
3:
Bounds: x1=12, y1=219, x2=213, y2=238
Type: -120
Info: 'No action'
4:
Bounds: x1=9, y1=211, x2=358, y2=212
Type: -64
Info: '.'
5:
Bounds: x1=9, y1=3, x2=207, y2=37
Type: -120
Info: 'Open an example design from the installed design kits'
6:
Bounds: x1=260, y1=11, x2=356, y2=132
Type: -64
Info: 'ê'
DITL_420_New Design Dialog.txt
Items: (13 entries)
0:
Bounds: x1=253, y1=181, x2=353, y2=201
Type: 4
Info: 'New'
1:
Bounds: x1=253, y1=290, x2=353, y2=310
Type: 4
Info: 'Cancel'
2:
Bounds: x1=253, y1=213, x2=353, y2=233
Type: 4
Info: 'Open...'
3:
Bounds: x1=253, y1=250, x2=353, y2=270
Type: 4
Info: 'Examples...'
4:
Bounds: x1=9, y1=41, x2=214, y2=203
Type: -128
Info: ''
5:
Bounds: x1=12, y1=215, x2=213, y2=231
Type: -120
Info: 'Open an existing design file'
6:
Bounds: x1=12, y1=290, x2=213, y2=309
Type: -120
Info: 'No action'
7:
Bounds: x1=9, y1=236, x2=358, y2=237
Type: -64
Info: '.'
8:
Bounds: x1=9, y1=283, x2=358, y2=284
Type: -64
Info: '.'
9:
Bounds: x1=9, y1=3, x2=207, y2=37
Type: -120
Info: 'Create a new design using the selected template'
10:
Bounds: x1=260, y1=11, x2=356, y2=132
Type: -64
Info: 'ê'
11:
Bounds: x1=9, y1=209, x2=358, y2=210
Type: -64
Info: '.'
12:
Bounds: x1=12, y1=243, x2=225, y2=275
Type: -120
Info: 'Select an example design from the installed design kits'
DITL_418_Text Tool.txt
Items: (11 entries)
0:
Bounds: x1=238, y1=114, x2=298, y2=134
Type: 4
Info: 'OK'
1:
Bounds: x1=238, y1=86, x2=298, y2=106
Type: 4
Info: 'Cancel'
2:
Bounds: x1=102, y1=86, x2=123, y2=106
Type: 6
Info: ''
3:
Bounds: x1=102, y1=108, x2=123, y2=127
Type: 6
Info: ''
4:
Bounds: x1=164, y1=86, x2=184, y2=106
Type: 6
Info: ''
5:
Bounds: x1=164, y1=108, x2=184, y2=127
Type: 6
Info: ''
6:
Bounds: x1=3, y1=3, x2=251, y2=52
Type: -120
Info: 'Choose the attribute field that will be set when the text tool is used to name devices and signals.'
7:
Bounds: x1=81, y1=65, x2=140, y2=81
Type: -120
Info: 'Devices'
8:
Bounds: x1=149, y1=65, x2=200, y2=83
Type: -120
Info: 'Signals'
9:
Bounds: x1=9, y1=88, x2=57, y2=106
Type: -120
Info: 'Name'
10:
Bounds: x1=9, y1=109, x2=78, y2=127
Type: -120
Info: 'InstName'
DITL_415_Circuit Info.txt
Items: (11 entries)
0:
Bounds: x1=263, y1=214, x2=323, y2=234
Type: 4
Info: 'OK'
1:
Bounds: x1=263, y1=185, x2=323, y2=205
Type: 4
Info: 'Cancel'
2:
Bounds: x1=109, y1=215, x2=249, y2=235
Type: 4
Info: 'Design Attributes...'
3:
Bounds: x1=109, y1=185, x2=249, y2=205
Type: 4
Info: 'Clear Change Count'
4:
Bounds: x1=7, y1=216, x2=98, y2=232
Type: 5
Info: 'Read only'
5:
Bounds: x1=174, y1=40, x2=291, y2=58
Type: 6
Info: 'Current Page'
6:
Bounds: x1=174, y1=60, x2=303, y2=78
Type: 6
Info: 'Current Circuit'
7:
Bounds: x1=174, y1=80, x2=335, y2=98
Type: 6
Info: 'Unrestricted circuits'
8:
Bounds: x1=174, y1=100, x2=311, y2=118
Type: 6
Info: 'Entire Design'
9:
Bounds: x1=7, y1=40, x2=167, y2=179
Type: -120
Info: ''
10:
Bounds: x1=7, y1=1, x2=329, y2=32
Type: -120
Info: ''
DITL_414.txt
Items: (1 entries)
0:
Bounds: x1=11, y1=9, x2=369, y2=31
Type: -120
Info: 'To cancel, hold down the key and type a period (.).'
DITL_413_Orientation.txt
Items: (21 entries)
0:
Bounds: x1=243, y1=96, x2=303, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=169, y1=97, x2=229, y2=117
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=32, x2=80, y2=48
Type: 6
Info: ''
3:
Bounds: x1=128, y1=32, x2=144, y2=48
Type: 6
Info: ''
4:
Bounds: x1=192, y1=32, x2=208, y2=48
Type: 6
Info: ''
5:
Bounds: x1=256, y1=32, x2=272, y2=48
Type: 6
Info: ''
6:
Bounds: x1=64, y1=64, x2=80, y2=80
Type: 6
Info: ''
7:
Bounds: x1=128, y1=64, x2=144, y2=80
Type: 6
Info: ''
8:
Bounds: x1=192, y1=64, x2=208, y2=80
Type: 6
Info: ''
9:
Bounds: x1=256, y1=64, x2=272, y2=80
Type: 6
Info: ''
10:
Bounds: x1=86, y1=32, x2=101, y2=47
Type: -64
Info: '∂'
11:
Bounds: x1=4, y1=3, x2=309, y2=22
Type: -120
Info: 'Choose orientation for next device selection'
12:
Bounds: x1=151, y1=33, x2=166, y2=48
Type: 64
Info: '∑'
13:
Bounds: x1=215, y1=34, x2=230, y2=49
Type: 64
Info: '∏'
14:
Bounds: x1=277, y1=33, x2=292, y2=48
Type: 64
Info: 'π'
15:
Bounds: x1=86, y1=65, x2=101, y2=80
Type: 64
Info: '∫'
16:
Bounds: x1=153, y1=64, x2=168, y2=79
Type: 64
Info: 'ª'
17:
Bounds: x1=214, y1=62, x2=229, y2=77
Type: 64
Info: 'º'
18:
Bounds: x1=276, y1=63, x2=291, y2=78
Type: 64
Info: 'Ω'
19:
Bounds: x1=4, y1=30, x2=59, y2=48
Type: -120
Info: 'Normal'
20:
Bounds: x1=4, y1=64, x2=59, y2=82
Type: -120
Info: 'Flipped'
DITL_412.txt
Items: (13 entries)
0:
Bounds: x1=165, y1=128, x2=225, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=92, y1=128, x2=152, y2=148
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=30, x2=36, y2=46
Type: 6
Info: ''
3:
Bounds: x1=118, y1=30, x2=134, y2=46
Type: 6
Info: ''
4:
Bounds: x1=217, y1=30, x2=233, y2=46
Type: 6
Info: ''
5:
Bounds: x1=20, y1=61, x2=36, y2=77
Type: 6
Info: ''
6:
Bounds: x1=118, y1=61, x2=134, y2=77
Type: 6
Info: ''
7:
Bounds: x1=217, y1=61, x2=233, y2=77
Type: 6
Info: ''
8:
Bounds: x1=20, y1=93, x2=36, y2=109
Type: 6
Info: ''
9:
Bounds: x1=118, y1=93, x2=134, y2=109
Type: 6
Info: ''
10:
Bounds: x1=217, y1=93, x2=233, y2=109
Type: 6
Info: ''
11:
Bounds: x1=26, y1=36, x2=227, y2=103
Type: -64
Info: 'ú'
12:
Bounds: x1=4, y1=3, x2=216, y2=21
Type: -120
Info: 'Choose text reference position'
DITL_411_Attach Circuit.txt
Items: (4 entries)
0:
Bounds: x1=137, y1=163, x2=197, y2=183
Type: 4
Info: 'Attach'
1:
Bounds: x1=136, y1=125, x2=196, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=56, x2=104, y2=191
Type: -128
Info: ''
3:
Bounds: x1=10, y1=2, x2=158, y2=51
Type: -120
Info: 'Select an open circuit to attach'
DITL_410_Print Options.txt
Items: (6 entries)
0:
Bounds: x1=180, y1=92, x2=240, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=92, x2=156, y2=112
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=24, x2=200, y2=40
Type: 6
Info: 'Print current circuit only'
3:
Bounds: x1=10, y1=42, x2=240, y2=58
Type: 6
Info: 'Print all unrestricted subcircuits'
4:
Bounds: x1=10, y1=60, x2=173, y2=76
Type: 6
Info: 'Print entire design'
5:
Bounds: x1=5, y1=1, x2=142, y2=20
Type: -120
Info: 'Print Range Options'
DITL_409_Pin List Dialog.txt
Items: (4 entries)
0:
Bounds: x1=187, y1=163, x2=247, y2=183
Type: 4
Info: 'Go To'
1:
Bounds: x1=186, y1=125, x2=246, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=44, x2=153, y2=187
Type: -128
Info: ''
3:
Bounds: x1=9, y1=6, x2=204, y2=39
Type: -120
Info: 'Signal ^0Pin List'
DITL_408.txt
Items: (4 entries)
0:
Bounds: x1=87, y1=45, x2=147, y2=65
Type: 4
Info: 'OK'
1:
Bounds: x1=14, y1=45, x2=74, y2=65
Type: 4
Info: 'Cancel'
2:
Bounds: x1=93, y1=12, x2=134, y2=29
Type: 16
Info: ''
3:
Bounds: x1=20, y1=11, x2=86, y2=30
Type: -120
Info: 'Text size'
DITL_407.txt
Items: (4 entries)
0:
Bounds: x1=137, y1=163, x2=197, y2=183
Type: 4
Info: 'Select'
1:
Bounds: x1=136, y1=125, x2=196, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=56, x2=104, y2=191
Type: -128
Info: ''
3:
Bounds: x1=10, y1=2, x2=158, y2=51
Type: -120
Info: 'Select a source page'
DITL_406.txt
Items: (6 entries)
0:
Bounds: x1=134, y1=105, x2=194, y2=125
Type: 4
Info: 'OK'
1:
Bounds: x1=134, y1=75, x2=194, y2=95
Type: 4
Info: 'Cancel'
2:
Bounds: x1=21, y1=52, x2=194, y2=68
Type: 8
Info: ''
3:
Bounds: x1=21, y1=82, x2=90, y2=98
Type: 8
Info: ''
4:
Bounds: x1=21, y1=112, x2=110, y2=128
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=204, y2=43
Type: 0
Info: ''
DITL_405.txt
Items: (7 entries)
0:
Bounds: x1=95, y1=153, x2=218, y2=173
Type: 4
Info: 'Import from File'
1:
Bounds: x1=13, y1=153, x2=73, y2=173
Type: 4
Info: 'Cancel'
2:
Bounds: x1=93, y1=122, x2=223, y2=143
Type: 4
Info: 'Import from Page'
3:
Bounds: x1=9, y1=28, x2=153, y2=44
Type: 6
Info: 'Set this page only'
4:
Bounds: x1=9, y1=48, x2=189, y2=64
Type: 6
Info: 'Set all pages in design'
5:
Bounds: x1=9, y1=84, x2=220, y2=104
Type: 5
Info: 'Import printer Page Setup'
6:
Bounds: x1=6, y1=2, x2=235, y2=22
Type: -120
Info: 'Import sheet layout information:'
DITL_403_Design Prefs.txt
Items: (28 entries)
0:
Bounds: x1=381, y1=210, x2=441, y2=230
Type: 4
Info: 'OK'
1:
Bounds: x1=311, y1=210, x2=371, y2=230
Type: 4
Info: 'Cancel'
2:
Bounds: x1=344, y1=133, x2=424, y2=151
Type: 4
Info: 'Pin Text...'
3:
Bounds: x1=251, y1=133, x2=331, y2=151
Type: 4
Info: 'Attr Text...'
4:
Bounds: x1=258, y1=180, x2=409, y2=196
Type: 5
Info: 'Rotate pin numbers'
5:
Bounds: x1=265, y1=156, x2=401, y2=175
Type: 4
Info: 'Text Tool Options...'
6:
Bounds: x1=231, y1=12, x2=435, y2=28
Type: 5
Info: 'Automatic page references'
7:
Bounds: x1=275, y1=32, x2=377, y2=50
Type: 4
Info: 'Update Now'
8:
Bounds: x1=300, y1=57, x2=371, y2=72
Type: 16
Info: ''
9:
Bounds: x1=376, y1=83, x2=409, y2=98
Type: 16
Info: ''
10:
Bounds: x1=23, y1=52, x2=151, y2=68
Type: 6
Info: 'Pure hierarchy'
11:
Bounds: x1=23, y1=69, x2=183, y2=85
Type: 6
Info: 'Physical hierarchy'
12:
Bounds: x1=23, y1=86, x2=122, y2=102
Type: 6
Info: 'Flat mode'
13:
Bounds: x1=16, y1=128, x2=150, y2=146
Type: 5
Info: 'Show Crosshairs'
14:
Bounds: x1=16, y1=146, x2=179, y2=164
Type: 5
Info: 'Show Cursor Position'
15:
Bounds: x1=16, y1=164, x2=195, y2=182
Type: 5
Info: 'Show Available Memory'
16:
Bounds: x1=16, y1=182, x2=206, y2=200
Type: 5
Info: 'Show Printed Page Breaks'
17:
Bounds: x1=16, y1=200, x2=175, y2=216
Type: 5
Info: 'Show Device Frames'
18:
Bounds: x1=238, y1=57, x2=292, y2=74
Type: -120
Info: 'Format'
19:
Bounds: x1=237, y1=81, x2=370, y2=100
Type: -120
Info: 'Max. width (items)'
20:
Bounds: x1=14, y1=31, x2=86, y2=49
Type: -120
Info: 'Hierarchy'
21:
Bounds: x1=14, y1=111, x2=125, y2=128
Type: -120
Info: 'Other Options'
22:
Bounds: x1=8, y1=0, x2=159, y2=18
Type: -120
Info: 'Design Preferences'
23:
Bounds: x1=227, y1=8, x2=448, y2=106
Type: -64
Info: '-'
24:
Bounds: x1=9, y1=28, x2=212, y2=105
Type: -64
Info: '-'
25:
Bounds: x1=9, y1=109, x2=212, y2=221
Type: -64
Info: '-'
26:
Bounds: x1=232, y1=113, x2=317, y2=129
Type: -120
Info: 'Text Options'
27:
Bounds: x1=227, y1=110, x2=448, y2=200
Type: 64
Info: '-'
DITL_400.txt
Items: (10 entries)
0:
Bounds: x1=237, y1=10, x2=325, y2=30
Type: 4
Info: 'Open Page'
1:
Bounds: x1=237, y1=152, x2=325, y2=172
Type: 4
Info: 'Done'
2:
Bounds: x1=237, y1=40, x2=325, y2=60
Type: 4
Info: 'New Page'
3:
Bounds: x1=237, y1=68, x2=325, y2=88
Type: 4
Info: 'Delete Page'
4:
Bounds: x1=237, y1=96, x2=325, y2=116
Type: 4
Info: 'Promote'
5:
Bounds: x1=237, y1=124, x2=325, y2=144
Type: 4
Info: 'Demote'
6:
Bounds: x1=6, y1=12, x2=199, y2=174
Type: -128
Info: ''
7:
Bounds: x1=6, y1=209, x2=339, y2=263
Type: 16
Info: ''
8:
Bounds: x1=97, y1=184, x2=225, y2=202
Type: -120
Info: '#'
9:
Bounds: x1=5, y1=184, x2=97, y2=202
Type: -120
Info: 'Title for page'
DITL_274.txt
Items: (3 entries)
0:
Bounds: x1=50, y1=88, x2=110, y2=108
Type: 4
Info: 'Quit'
1:
Bounds: x1=133, y1=88, x2=193, y2=108
Type: 4
Info: 'Return'
2:
Bounds: x1=6, y1=4, x2=238, y2=74
Type: -120
Info: 'The circuit connection data on the clipboard will be lost when you quit the program. Only the picture is retained for external use.'
DITL_271.txt
Items: (7 entries)
0:
Bounds: x1=297, y1=257, x2=411, y2=277
Type: 4
Info: 'Attempt Repair'
1:
Bounds: x1=327, y1=225, x2=387, y2=245
Type: 4
Info: 'Cancel'
2:
Bounds: x1=73, y1=2, x2=413, y2=37
Type: -120
Info: 'Warning: The following internal error was detected during the last operation:'
3:
Bounds: x1=8, y1=146, x2=339, y2=180
Type: -120
Info: 'The circuit data contains a structural error which can be repaired by clicking the button below.'
